Aldo

Fremont · build cost

What it costs to build a house in Fremont, NY

Standard $195–256/sq ft 1,800 sq ft ≈ $350k–460k Land $9,668/ac Min lot 0.46 ac

A standard-finish house in Fremont runs about $195–256/sq ft all in, which on a 1,800 sq ft build works out to roughly $350k–460k with general-contractor margin already in it. The part people leave out is what you pay before that, because the smallest conforming residential lot in the Town of Fremont is 0.46 acres and vacant land here carries a median assessed value of $9,668 an acre, so the dirt alone is around $4,447 and the whole thing lands near $355k–465k. The figures below come out of the same cost engine Aldo uses to price a real parcel, broken out by system and by what a harder site adds, so you can see where the money actually goes.

Land plus build: the real number in Fremont

Build cost is the half everyone quotes. The other half is the lot, and in the Town of Fremont the code will not let you build on less than 0.46 acres in its most permissive residential district, so that is the smallest ticket into the town.

LineAmount
Minimum conforming residential lot (0.46 ac at $9,668/ac) $4,447
House, 1,800 sq ft, standard finish, slab on a flat lot $350k–460k
Land and build together $355k–465k

Land is roughly 1% of that total in Fremont. The per-acre figure is the median assessed full market value of vacant residential land across 395 priced parcels here, which is a proxy for what dirt is worth and not an asking price - road-frontage lots that are ready to build on trade above it, and back land without access trades below.

Cost per square foot by finish level

All in, general-contractor margin included, for a slab-on-grade build on a flat and clear lot. The rate holds steady whether you build 1,200 or 2,500 sq ft, which is why the finish level moves a budget more than the size does.

Finish level$ / sq ft1,800 sq ft total
Standard $195–$256 $350k–460k
Custom $260–$387 $470k–695k
Luxury $397–$685 $715k–1.24M

Standard — Builder-grade but solid - stock cabinetry, mid-range windows, standard fixtures. What most spec cabins and rental builds run.

Custom — Better envelope, upgraded windows and doors, semi-custom millwork and fixtures. The typical Hudson Valley owner-build.

Luxury — High-performance envelope, custom cabinetry, designer fixtures and specialty finishes. Architect-driven, no stock parts.

Where the money goes

A standard-finish build at Sullivan County pricing, broken out by trade as dollars per square foot. Foundation and site work here are the slab and flat-lot baseline, so a harder site stacks on top of them.

System$ / sq ft
Site work $7–$10
Foundation $16–$22
Framing $24–$30
Envelope - roof, siding, windows $30–$39
Plumbing $16–$19
Electrical $12–$16
HVAC $14–$17
Insulation $7–$9
Interior finishes $26–$35
Millwork & cabinetry $10–$16

What moves the number

The baseline assumes the easy case. Each of these stacks on top, per square foot, at Sullivan County pricing:

Whole-project totals

Standard finish, slab on a flat lot, all in and before land. A harder site or a higher finish moves these up.

Home sizeEstimated build costWith a conforming lot
1,200 sq ft $235k–305k $240k–310k
1,800 sq ft $350k–460k $355k–465k
2,500 sq ft $490k–640k $495k–645k

Local rules that move a build budget in Fremont

Sizing up a specific parcel in Fremont?

Aldo pulls the exact zoning district, setbacks, and build feasibility for any parcel — before you buy. Enter your email to open Aldo and run your free report.

Building an accessory unit instead?

An 800 sq ft ADU in Fremont runs about $190k–250k, and the per-square-foot rate is higher than a full house because the kitchen, bath, panel and heating plant cost the same either way. See what it costs to build an ADU in Fremont, priced by size.

Cost to build in nearby towns

Cost to build in Fremont: common questions

How much does it cost to build a house in Fremont, NY?

A standard-finish new build in Town of Fremont runs about $195–256/sq ft all in, general-contractor margin included, which puts a 1,800 sq ft house at roughly $350k–460k. A full basement, a sloped or wooded site, or a winter foundation pour each add to that, and a custom or luxury finish level moves it up again. Land is on top: a minimum conforming lot of 0.46 acres runs about $4,447 here, for a combined $355k–465k.

What is the cheapest way to build in Fremont?

The three levers that move a budget most here are finish level, foundation and site. Standard finish on a slab, on a flat and already-cleared lot, in the warm season, is the floor - every step away from that combination is priced in the tables above. Square footage matters less than people expect, because the per-square-foot rate barely moves between a 1,200 and a 2,500 sq ft house; what changes is the total.

Do I need a bigger lot to build in Fremont?

The smallest residential minimum lot size in Town of Fremont is 0.46 acres, and the more rural districts go up to 3 acres. Which minimum applies depends on the district your parcel sits in, so confirm the district before you assume a lot is buildable.

Does it cost more to build in winter in Fremont?

Yes. Foundation and site work carry a winter premium because of frost protection, heating and ground conditions, and at Sullivan County pricing that works out to about +$2.7–3.9/sq ft across the whole build. It is usually cheaper to wait for spring than to pay it, unless the schedule is already costing you more somewhere else.

Construction figures are modeled estimates from Offsite's cost engine in current 2026 dollars, general-contractor margin included, using the Sullivan County regional index. They are planning numbers for decision-support only - not a bid, quote, or guarantee, and not architectural or engineering advice. Zoning figures for the Town of Fremont come from the municipal code (last reviewed 2026-08-16) and can carry district exceptions and overlays this page does not show. Actual cost depends on the specific parcel, design, site conditions and market at the time you build; verify with the building department at (845) 887-6605 and get a real estimate before you commit. Sources: Offsite / Aldo cost engine (costEngine.js + constants.js); zoning dataset (municipalData.js) ; NYS statewide tax-parcel layer, vacant residential full market value per acre.

Building outside these counties?

Aldo covers 10 Hudson Valley & Capital Region counties today. Tell us your market — we'll build the zoning + feasibility data for it.